Alge WTN Wireless Timing Network

WTN is a worldwide unique wireless timing network with mesh topology. It can transfer timing information as well as serial data and display board information simultaneous.

All devices act as transceivers, so no separate transmitters and receivers are necessary.  The more devices you use, the more reliable it gets.

Alge WTN Wireless Timing Network Features:

  • 9 single teams
  • 6 combined teams
  • 5 timing channels per device
  • RS232 and display board interface
  • 2.4 GHz technology
  • approx. 320 m point to point distance
  • battery saving technology
  • 2-edge mode for special measurements
  • communication stored through “delayed impulses”
  • pulse hold feature to control photocell alignment

The WTN Wireless Timing Network will work with other Alge devices, such as the TIMY 3, PR1A-W Photocell, Bang Wireless Start System and more…

Frequency

2.4 GHz band (16 adjustable frequencies)

Power output

10 mW or 10 to100 mW (adjustable)

Wireless distance

up to 350m (line of sight)

Timing channels

5 different timing channels (c0 (start), c1 (finish), c2, c3, c4)

Display board interface

RS232 interface – 2400 to19200 Baud

RS232 interface

RS232 interface – 2400 to115200 Baud

RS485 interface

RS485 interface – fixed Baud rate

Battery

3 x AA batteries (Alkaline or NiMh rechargeable)

Case

Plastic case with yellow elastic rubber coating

You may also like…

Go to Top