ASC2

£POA

Enquire

Incorrect please try again
Enter the words above: Enter the numbers you hear:

The Alge ASC2 LED Start clock provides a professional image to any event. The display can be pre-programmed to countdown at set intervals, making it ideal for events/sports where participants need to start for example every one minute. 

Features include:

  • Time of Day display
  • LED Countdown display
  • LED Traffic Light Start Sequence
  • Pre-programmable Countdown Sequence
  • Audible Start tone at pre-programmed countdown sequence
Additional Information:
  • High Brightness LED's
  • Shows the time of day (hours, min. and sec.)
  • Figure height (time of day digits) is 5.5 cm
  • Shows the countdown with three digit in minutes and seconds
  • Figure height (countdown digits) is 7 cm
  • Start light with red, yellow and green
  • Integrated speaker with volume control
  • RS232 interface to connect a PC (settings can be adjusted via PC)
  • Integrated battery that will power the ASC2 for about 7 hours at 20°
  • Two integrated push buttons for adjustments
  • Start input (banana socket)
  • Sync. Input or countdown start (banana socket)
  • Impulse output (banana socket)
  • Output for external speaker
  • Power Supply (12 VDC or 100-240 VAC)
  • On/Off switch
Measurement: 1/1000 seconds
Measuring Range: 23 hours, 59 minutes, 59.999 seconds
Accuracy: +/- 2.5 ppm (+/- 0,009 second per hour)-6 between –20°C and +30°C (-4°F and 90° F)
Time Base: temperature compensated real time clock
Display: extra bright LED for outdoor use, birghtness adjustable
8-digit LED-display, figure height 55 mm (2.16”), to show time of da
3-digit LED-display, figure height 70 mm (2.75”), to show the countdown
start light with 3 LED-clusters in red, yellow and green, each 30 mm (1.18”) diameter
Temperature Range: --25°C to +65°C (-13 F to 149 F)
Power Supply:

built-in powerpack (rechargeable battery (12 VDC, 7 Ah) and charger or external battery (12 - 35 VDC) or mains (100 - 240 VAC)

Autonomy: about 7 hours with one countdown pro minute at 20°C in standard mode from internal battery
Housing: anodized aluminium with cover and suspension flaps, 3/8" thread for tripod (tripod not included)
Dimensions: W x H x D = 380 x 300 x 110 mm (14.96" 11.81" x 4.33")
Weight: 6.4 kg (14.1 lbs.)
Bookmark and Share

Click to view full image.

Zoom Out
Zoom In

Latest news

Welsh Cycling Small

Welsh Cycling is the national governing body for cycling in Wales with a network of over 140 cycling clubs. The association administers...

Read more